Z-Wave Plus Smart 2 in 1 Sensor Temperature/Humidity (Pack of 2)

This is a neat 2-in-1 Z-Wave Plus sensor. The sensor measures the humidity (in percent) and the temperature of its environment. It’s ideal for installation in bedrooms, living areas, where you want to track both the heating/cooling efficiency of your home, along with the relative humidity. Did you know that the ideal home humidity level is between 40 and 55%? Poor humidity can lead to condensation problems, damp, or things drying out. By using Z-Wave all the information is transferred to the Gateway. The 2-in-1 Sensor can be mounted on almost every surface in horizontal or vertical position. The sensor has a casing with a barred aperture for the measurement of the humidity. With the sensors you can easily make your home smarter. The sensors are small, inconspicuously and fit on every surface and you can easily integrate the sensors to your Z-Wave Smart Home gateway. Simple and easy installation: Remove plastic battery tab, to add device to your Z-Wave Hub-push down the lever switch on the back of the sensor 3 times during pairing mode.

• Z-Wave Plus
• Higher output power to enhance the communication range (+5dBm output power as compared to -2.5dBm on the 300 series chipset)
• Compact and tidy Humidity Sensor and Temperature Sensor
• Extremely low power consumption
• 1700mAh CR123A Lithium battery offering 7 years battery life
• Low power indication
• Slim, small and elegant
• Dimensions: sensor: 3 x 1 x 1 inches
• Operating temperature: -10 40 deg C (14-104 deg F)
• Very easy to install with included adhesive pads
• Conforms to: EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2, En62479, En60950, FCC Part 15 B, FCC Part
• Requires a Z-Wave certified gateway, providing remote access from any mobile device.
• Z-Wave Plus Certified
• Pack of 2
• Simple and easy installation: remove plastic battery tab, to add device to your Z-wave hub-push down the lever switch on the back of the sensor 3 times during pairing mode