SaniStar 1-piece 1.28/1 GPF Dual Flush Elongated Toilet in White with Wall Carrier

This modern shaped self-contained China toilet emulates the European wall-hung toilets that are so popular. It can be used to install a half-bathroom up to 9 ft. below the sewer line, or even up to 100 ft. away from a soil stack. The SaniStar can handle the effluent from a toilet and sink for residential applications. The SaniStar saves space and can be hung on any sturdy wall. It comes complete with a wall bracket system that can be placed against a wall or if you start from scratch, it can be built into the wall and mounted against a set of double 2 x 6 studs. The wall bracket has feet that can be adjusted to allow the SaniStar to be hung at a height that is comfortable for the user; for example between 15 in. and 18 in. The SaniStar uses a minimum amount of water. The SaniStar is a combination of a vitreous China toilet bowl and macerator/pump built into 1 compact unit. The SaniStar needs no gravity flow tank as the flushing action and macerating pump cycle is automatic after pressing a push button on top of the bowl. The flushing mechanism is electrically timed to allow water to pass through the toilet. By pressing the push button, this activates a timer and a solenoid valve in order to fill and wash the sides of the bowl. The motor starts and the waste and paper are sucked inside, where it is macerated and pumped away. The motor stops after approximately 10 to 15 seconds and the timer programs the refill of the bowl with fresh water.

• Wall mounted toilet with built in macerator pump
• Dual flush 1.28 GPF and 1.0 GPF
• Stylish toilet with seat and wall carrier included
• Vertical pumping to 9 ft. and 100 ft. horizontally to 100 ft.
• Discharge elbow on the back of the SaniStar can be rotated 360° to fit any type of installation required; a non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit
• SaniStar is a forced main and does not need to vented and connected to a vent stack; other fixtures may need to be vented as per local plumbing codes
• Also highly recommended for the macerator/pump to be connected to a ground fault interrupter (GFI) circuit