2.58 in. x 2 in. Nickel 105-Degree Full Overlay Self Close Frameless Hinge (60-Pack)

Frameless Cabinet Hinge with plate Hinge is made from steel and nickel plated. Hinge cup drilled in the back of the door is 35 mm (1-3/8 in.) in diameter. Door opening angle is 105°. Hinge allows adjustments after installation Hinge cup drilled in the back of the door is 35 mm (1-3/8 in.) in diameter. Door opening angle is 105°. Hinge allows adjustments after installation This hinge may be used to retrofit existing cabinets. Simply detach your existing hinges from the cabinets, replace the hinges using the existing screws. Full Overlay ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13 mm (1/2 in. deep). Top hinges required a 12.5 mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13 mm cup depth even though the requirement was only 12.5 mm so yours may actually already be drilled to 13 mm. Each hinge uses 4 each #6 flat head screws (not included but offered for purchase during checkout). Hinge is made from steel and nickel plated.

• Main features: the hinge will have a straight arm and it allows your cupboard door edge to be completely in line with the edge of your cabinet, 1 major advantage of a full overlay concealed hinge is that is fully adjustable due to three little screws which it has, they can be fine-tuned to ensure the door frame is totally concealed and fits together perfectly
• Main features: these hinges are a type of hinge that has a spring built into it so when you start to close a cabinet door, the spring, at some point, takes over and pulls the cabinet door closed with a tap
• Cup diameter: 35 mm, cup depth: 12.5 mm, material: steel, finish: nickel plated
• Using: these hinges used everywhere, from kitchen to office in frameless cabinets