1 in. 8 Zone Indexing Valve with 7 Zone Cam

The 1 in. 8 outlet indexing valve is a reliable and economical way to automate multiple zoned irrigation systems. This Hydro Indexing Valve has 1 inlet and 8 outlets which are all 1 in. slip fit. The simple design of the indexing valve ensures easy installation and maintenance.

• This valve is recommended for use in an irrigation system driven by city water
• Standard flow stem and disc assembly (included) requires a minimum of 10 GPM, the low-flow stem and disc assembly requires a minimum of only 6 GPM (not included)
• This valve can run 7 or 8 zones depending on the cam configuration
• 1 year manufacturers guarantee
• Comes installed with an 8 zone and cam and an additional 7 zone cam
• An anti-siphon valve (not included) is recommended and may be required for safe operation of the FIMCO hydro indexing valve on a city water installation
• Great alternative to individual solenoid valves
• 1 valve can replace up to (8) 1 in. solenoids
• 1 above ground FIMCO valve controls all zones eliminating the need to dig into the ground to locate electric solenoid valve boxes
• Works manually or fully automatic with a controller (not included) to turn on and off the water supply (pump or solenoid)
• Only use standard clear PVC cement (not included) for installation of the valve and allow 2 hours to set before subjecting it to internal water pressure, do not use fast setting "blue glue" as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and not the valve housing