PC-7 4 lb. Paste Epoxy

Stock status: In stock
Country: United Kingdom

PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80°F than at 40°F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more.

  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Fills holes, castings, and molds
  • Application temperature range is 35 to 115°F
  • Service temperature range is -20 to +200°F
  • Formulated for maximum bonding power
  • Work time (70°F): 60 minutes
  • Tack free cure time: 160 minutes
  • Cure for service: 24 hours
  • Maximum cure: 7 day
Product Depth (in.) 4.5
Product Height (in.) 9.75
Product Size (oz.) 48
Product Width (in.) 4.5 in
Adhesion level High
Adhesive Product Type Glue/Epoxy
Curing time (hours) 12
Features Drillable,Moisture Resistant,Sandable,Solvent Resistant
Flammable No
Glue/Epoxy Type Plastic Epoxy
Indoor/Outdoor Indoor/Outdoor
Package Quantity 1
Product Weight (oz.) 48 oz
Recommended Surfaces Brick,Ceramic,Concrete,General Purpose,Glass,Metal,Multi-Surface,Stone,Tile
Returnable 90-Day
Set Time (Min.) 60
Manufacturer Warranty Since mixing and use is beyond our control, Protective Coating Co accepts no liability other than refund or replacement due to product defect only