Huge pressure and huge output - that’s the name of the game when you combine the Eccotemp L10 with the small but powerful Flojet 2.9 GPM 50 PSI. With almost twice the GPM of its smaller sibling the Eccotemp L5, the L10 has long been the high volume portable water heater of choice for cabins, lake houses and base camps. But if your little piece of outdoor paradise doesn’t include a water faucet, then you’re out of luck. This is where the Flojet Water Pump, a perfect fit with the L10, comes in. With its 2.9 GPM 50 PSI specs, this powerful little pump stands up to the high volume output of the L10 and will turn any container or body of cold water into instant pressurized hot water. Add the Flojet Inlet Strainer into the mix and not only will that freezing lake water turn into a nice steaming hot shower, it will also be free of dirt, rocks, and other debris. Straining out the debris will also keep your pump running at peak condition by preventing unnecessary breakdowns. When facilities are lacking, keep your L10 running at maximum capacity with the Flojet 2.9 GPM 50 PSI.
| Product Depth (in.) | 8 in |
|---|---|
| Product Height (in.) | 26 in |
| Product Width (in.) | 14 in |
| Vent diameter (in.) | 0 |
| Water Connection Size (in.) | 1/2" |
| Application Type | Point of Use |
| Finish Family | White |
| Flow Rate @ 35 F Rise (gallons/min) | 2.65 |
| Flow Rate @ 45 F Rise (gallons/min) | 2.2 |
| Flow Rate @ 55 F Rise (gallons/min) | 1.9 |
| Flow Rate @ 65 F Rise (gallons/min) | 1.5 |
| Fuel Type | Gas |
| Gas Connection Size | 3/4" |
| Heat Exchanger Warranty | 1 Year |
| Maximum Temperature (F) | 140 |
| Minimum Activation Rate (gpm) | .75 |
| Minimum Temperature (F) | 80 |
| Product Weight (lb.) | 27 lb |
| Required Volt Connection | 3 volt |
| Returnable | 90-Day |
| Total BTU | 75000.000 |
| Uniform Energy Factor | .79 |
| Vent Type | Single Wall |
| Water Heater Features | Wall Mountable |
| Certifications and Listings | No Certifications or Listings |
| Labor Warranty | No Warranty |
| Part Warranty | 1 Year |