LEANSAFE 8 ft. Fiberglass Leaning Step Ladder with 300 lb. Load Capacity Type IA Duty Rating

The L6208 fiberglass 8 ft. leaning ladder is ideal for the professional. With a duty rating of 300 lbs. it features the LEANSAFE ladder top that secures tools and accessories and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles and wall studs and perform as a standard stepladder. LEANSAFE ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a standard step ladder is not an option on a jobsite, so we designed the LEANSAFE ladders with a 2-color design and highly visible LEANSAFE logos to make this ladder easily distinguishable from a standard stepladder. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent pending single latch design stays engaged when needed, and is centrally located to easily open and close. Anchoring the ladder is the EDGE360 bracing to protect the bottom of the ladder. LEANSAFE ladder front feet have curved non-marring rubber foot pads that maximize the surface area in both the step ladder and leaning ladder modes. Available in 4, 6, 8, 10, and 12 ft. heights. Built with a 300 lbs. duty rating this L6200 series ladder provides the professional contractor a single ladder that works as an improved standard stepladder and leaning ladder to safely get closer to your work.

• LEANSAFE ladder top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Color and branding differentiates LEANSAFE from standard stepladders
• Rail latch with single action opening and closing locks the rear rail to the front rail to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both leaning mode and stepladder mode
• Double riveted slip-resistant TRACTION-TRED steps
• Back-up plates reinforce all top connectors
• Heavy duty internal spreaders
• Full set of rear horizontals spaced 1 per foot
• EDGE360 bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates or washers to protect rails
• 8 ft. LEANSAFE leaning ladder in stepladder mode has a maximum standing height of 5.9 ft. and a maximum reach height of 12 ft.
• 8 ft. LEANSAFE leaning ladder in leaning mode has a maximum standing height of 4.9 ft. and a maximum reach height of 11 ft.