SaniCompact 1-Piece 1.28/1 GPF Dual Flush Elongated Toilet in White with Built-In 0.3 HP 115-Volt Macerator Pump

The SaniCompact is a self-contained system that is used to install a half-bathroom up to 9 ft. below the sewer line, or even up to 120 ft. away from a soil stack. The SaniCompact can handle the effluent from a toilet and sink for residential applications. The SaniCompact is a combination of a vitreous China toilet bowl and macerator/pump built into 1 compact unit. This modern shaped self-contained China toilet is especially designed with several ideas in mind: For situations where there is not enough space. As a toilet that uses a minimum amount of water. As a toilet for use with people that have physical limitations. The SaniCompact needs no gravity flow tank as the flushing action and macerating pump cycle is automatic after pressing a push button on top of the bowl. The flushing mechanism is electrically timed to allow water to pass through the toilet. By pressing the push button, this activates a timer and a solenoid valve in order to fill and wash the sides of the bowl. The motor starts and the waste and paper are sucked inside where it is macerated and pumped away. The motor stops after approximately 10 to 15 seconds and the timer programs the refill of the bowl with fresh water. The standard dual flush version uses 1.28 GPF (4.8 LPF) and 1 GPF (3.8 LPF).

• Build a half bath for residential applications
• Vertical pumping to 9 ft.
• Standard dual flush 1.28 GPF and 1.0 GPF
• Includes seat
• Allows the connection of a sink
• Discharge elbow on the back of the SaniCompact can be rotated 360° to fit any type of installation required; a non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit
• SaniCompact is a forced main and does not need to vented and connected to a vent stack; other fixtures may need to be vented as per local plumbing codes
• Also highly recommended for the macerator/pump to be connected to a ground fault interrupter (GFI) circuit