5 Gal. Tournament Green Recreational Surface Coating

DAP DYNAFLEX 230 100% waterproof window, door, siding and trim sealant is a premium elastomeric sealant with silicone like toughness to withstand the elements. Combines outstanding durability, adhesion and flexibility with easy tooling, paintability, low odor and water clean-up. Highly flexible to handle joint movement without cracking, crumbling or losing adhesionIdeal for sealing around window and door frames, siding and trim both inside and out.

• Plush color is to be applied with a commercial grade rubber squeegee
• Plush color is shipped in concentrate form; please refer to specification sheet for proper dilution rate
• Playability - outstanding performance is the key to the best playability assuring the player a consistent ball bounce and stability
• Durability - our 100% acrylic binder is fortified with fibers assuring the highest quality surface and made to resist harsh weather conditions
• Fade resistant colors - the color protection formulation guarantees a non-fading court
• Application rate - coverage will depend upon the porosity of the surface to which the Plush color acrylic color system is applied the average coverage will be 300–400 sq. ft. per 5 gal. pail (0.07 gal./sq. yd.)
• Drying time is 30 to 90 minutes under optimum conditions - humidity, surface temperature and ambient temperature will affect drying process
• Plush color acrylic color should not be applied when ambient temperature is below 50°F or when surface temperature is above 140°F
• Do not apply in if rain in forecast within 24 hours, do not store in direct sunlight and do not let product freeze
• Plush color acrylic color should be allowed to cure for 24 hours before courts are opened for use
• Note: for Portland cement (concrete) applications surface must cure for a minimum of 30 days; after 30 days, new concrete must be acid etched with either phosphoric or muriatic acid; application of Plush recreational surfacing products may begin thereafter
• Prep: Surface should be thoroughly cleaned prior to coating; power wash surface to remove any peeling, algae stains, dirt, grease...then blow off; use Plush patch binder kit for cracks and depressions post cleaning and prior to coating
• Mix: See use & care manual for instructions; use a clean, empty pail for mixing; pour half of Plushcolor into empty pail, leaving 2 half-full pails of color; add sand (80-100 mesh/not play sand/found at contractor supply houses) and water amount to each pail; mix color,sand&water until consistent
• Do inbounds first; pour bead across width of court and using a squeegee overlap as you go back and forth across court
• Online price includes Paint Care fee in the following states: CA, CO, CT, ME, MN, OR, RI, VT